CG Piling Hammers
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube, combi piles, ‘H’ sections and reinforced / pre stressed concrete piles. Operated from piling rig leaders or crane suspended, the CG range has the following important features:
- Total control of hammer stroke and blow rate
- Allows precise matching of energy to suit the pile driving requirements
- Simple fast dolley changing
- Cylinder and dropweight connection with shock absorber, easily accessible
- Economical - Low Hydraulic power requirement
- Available with BSP Hydropacks for optimum hammer performance
- Can drive Piles with ultimate load bearing up to 14,500 kN
- Suitable for driving Raked (Batter) Piles
| Performance Data |
Ram Mass |
Max Impact Energy |
Blow Rate @ rated Energy |
Operating Pressure |
Hydraulic Flow Required |
| Model |
kg |
kNm |
bpm |
bar |
L/min |
| CG180 |
12000 |
176 |
34 |
180 |
380 |
| CG210 |
14000 |
206 |
36 |
260 |
400 |
| CG240 |
16000 |
235 |
34 |
280 |
400 |
| CG300 |
20000 |
294 |
32 |
280 |
420 |
CG270 (18T) available to special order. Performance related to use with BSP Hydropacks.
Table shows approximate weights and dimensions for the hammer configurations that are illustrated above (weight includes typical drive cap or helmet)
| Typical Dimensions |
Basic Hammer |
Hammer in configuration (A) |
Hammer in configuration (B) |
Hammer in configuration (c) |
| Model |
kg |
Total Length (mm) |
Total Weight (kg) |
Total Length (mm) |
Total Weight (kg) |
Total Length (mm) |
Total Weight (kg) |
| CG180 |
17300 |
9050 |
23750 |
7500 |
21350 |
7250 |
20880 |
| CG210 |
19350 |
9370 |
25800 |
7830 |
25200 |
7580 |
22930 |
| CG240 |
21700 |
9810 |
34200 |
8160 |
27550 |
7910 |
2280 |
| CG300 |
26000 |
11310 |
46000 |
8820 |
31850 |
8570 |
29580 |
The above weights and dimensions are given as a typical guide only. Designs can vary to suit customer specific applications and pile type. Contact BSP for greater detail.
Downloads
This text is replaced by the Flash movie.