CGL590
The CGL590 hydraulic piling hammer can be used crane suspended or configured with backguides for leader use. The hammer is designed for driving a variety of bearing piles including steel tubes, combi-piles, H-sections, raked or batter piles and reinforced/prestressed concrete piles. Piles up to 2m in diameter can be driven as standard, and with special attachments, larger diameters can be accommodated.
Key features of the CGL590 are the cylinder and drop-weight connection parts are easily accessible for maintenance, the square-section minimises overall height, and the digital readout of hammer performance is available in a choice of units (stroke or energy).
Read MoreThe CGL models are economical to operate due to a low hydraulic power requirement. The hydraulic cylinder is BSP-TEX’s own designed and developed system. Choose BSP-TEX Hydropack power packs for optimal performance.
-
Total control of hammer stroke and blow rate
-
Cylinder and drop-weight connection parts are easily accessible
-
Digital readout of hammer performance in choice of units (stroke or energy)
-
Square section giving a shorter overall height
-
Attachment points allowing vertical or raking piles to be driven
-
Piles up to 2m diameter can be driven as standard
Model | CGL590 |
---|---|
Dropweight Mass (kg) | 40000 |
Hammer Energy (kN.m) | 590 |
Max Equivalent Stroke (m) | 1.50 |
Operating Pressure (bar) | 290 |
Hyd Oil Flow required (L/min) | 1000 |
Blow Rate at rated energy (bpm) | 32 |
Basic Hammer Length (mm) | 10750 |
Basic Hammer Weight (kg) | 60000 |
Operating Mode |
FS PR |
Pile Type |
TH CW |
Maximum Pile Size (mm) | 3000 |
Power Source |
PP |
Max Pile Bearing Capacity (kN) | 46000 |
Files | Datasheet |
Get a Quote