DX Hammer

The DX range of hydraulic piling hammers are designed for small bearing piles of steel, timber, concrete and many sheet piles. The DX hammer is available with back guides for operating from a piling mast or a slider for operating from an excavator.

The DX hammer can be mounted on road, rail or tracked excavators with an operating weight of around 32t or greater. Applications include railway equipment installation and maintenance. Specifically developed to drive steel piles to support electrification stanchions, gantries and other railway projects requiring foundation piling. When mounted to the excavator’s bucket linkage, the hammer can be quickly erected from a horizontal transport position to a vertical position. Side tilt adjustment of five degrees left and right allows it to cope with the cant of the rail lines. During piling the hammer is automatically guided or crowded in the vertical plane.

Three models are available, the DX20, DX25 and the larger DX30, which offer drop-weights of 1.5t, 2.0t and 2.5t. Maximum impact energy is 20kNm, 25kNm and 30kNm respectively while blow rate at rated energy for or models is approximately 60 blows per minute.

DX hammers can also be used to drive sheet piles, small bearing piles, tubular steel piles, timber or concrete piles with ultimate load bearing up to 2500kN. They can be operated directly from a suitable hydraulic excavator. A feature of the new hammers is an innovative BSP double-acting cylinder, whereby the ram is accelerated on its downward path to achieve higher impact energy.

Suitable for typical piles driven singly or in pairs. Most Arcelor AZ and AU14 piles. Also, LX / PU / W Ranges, Hoesch H1200 to H3600, ‘H’ Piles, HP260 to HP400, USA HP10” to HP16”. Tubes up to 406mm Dia (16”) Rail Standard 610mm & 762mm Diameter tubes, plus many others...

Total control of hammer
Allows precise matching of energy to suit the pile driving requirements
Double acting cylinder produces high impact energy and fast blow rate
Economical - low hydraulic power requirements
Available with BSP Hydropacks for optimum hammer performance
Hammer can be operated directly from hydraulic crane or excavator base
Can drive piles with ultimate load bearing up to 2500kN

Model	DX20	DX25	DX30
Dropweight Mass (kg)	1500	2000	2500
Hammer Energy (kN.m)	20	25	30
Max Equivalent Stroke (m)	1.20	1.20	1.20
Operating Pressure (bar)	150	160	170
Hyd Oil Flow required (L/min)	150	150	150
Blow Rate at rated energy (bpm)	60	60	60
Basic Hammer Length (mm)	4000	4000	4300
Basic Hammer Weight (kg)	3900	4500	5500
Operating Mode	PR EM	PR EM	PR EM
Pile Type	SP TH CP WP	SP TH CP WP	SP TH CP WP
Maximum Pile Size (mm)	800	800	800
Power Source	PTO	PTO	PTO
Max Pile Bearing Capacity (kN)	1400	1800	2500
Datasheet	Datasheet	Datasheet	Datasheet
Related Power Packs	View Power Packs	View Power Packs	View Power Packs
Product	View DX20	View DX25	View DX30

Power Packs Available For: DX20

Hydropack 130

BSP-TEX Hydropacks are used to power hydraulic pile driving hammers. Diesel power is provided by either Caterpillar or Perkins series industrial engines. All engines are turbocharged and after-cooled, and Hydropacks are exceptionally reliable and easy to

View Hydropack 130