LX20
The LX20 hydraulic hammer is a powerful yet lightweight hammer, designed to provide greater stability to piling rigs.
The LX20 hammer provides an economical solution for the installation of all types of piles. It is capable of driving steel, concrete or timber piles in a variety of soil conditions. With a dropweight of 2500 kg, it delivers 20kNm of impact energy.
Major features include total control of hammer stroke and blow rate; precise matching of energy to suit the pile driving requirements while a highly efficient hydraulic system reduces energy loss and maintains a low running cost. The Hydraulic cylinder is BSP-TEX’s own designed and developed system.
Read MoreOther important features include optimum power to weight ratio and due to the cage and dropweight design the hammer has a short overall length. Design of the cylinder, dropweight connection and shock absorber provide easy access for maintenance.
The hammer can be fitted with a single acting hydraulic system to give an equivalent stroke of 800mm or alternatively a double acting cylinder can be fitted to give an equivalent stroke of 1.2m. In addition, a range of standard drive caps and pile helmets are available. The LX20 can be operated from BSP-TEX power packs or from hydraulic piling rigs or cranes.
-
Total control of hammer
-
Designed for easy maintenance
-
Short overall length
-
Optimum power to weight ratio
-
Can operate from BSP Power pack or from hydraulic piling rigs or cranes
-
A range of standard drive caps and pile helmets are available
-
The hammers are fitted with a single acting hydraulic cylinder system to give an equivalent stroke of 800mm
| Model | LX20 |
|---|---|
| Dropweight Mass (kg) | 2500 |
| Hammer Energy (kN.m) | 20 |
| Max Equivalent Stroke (m) | 0.80 |
| Operating Pressure (bar) | 120 |
| Hyd Oil Flow required (L/min) | 160 |
| Blow Rate at rated energy (bpm) | 45 |
| Basic Hammer Length (mm) | 4800 |
| Basic Hammer Weight (kg) | 5600 |
| Operating Mode |
PR |
| Pile Type |
TH CP WP |
| Maximum Pile Size (mm) | 800 |
| Power Source |
PTO |
| Max Pile Bearing Capacity (kN) | 1500 |
| Files |
Datasheet
|
Power Packs Available For: LX20
Hydropack 130
BSP-TEX Hydropacks are used to power hydraulic pile driving hammers. Diesel power is provided by either Caterpillar or Perkins series industrial engines. All engines are turbocharged and after-cooled, and Hydropacks are exceptionally reliable and easy to
Hydropack 150
BSP-TEX Hydropacks are used to power hydraulic pile driving hammers. Diesel power is provided by either Caterpillar or Perkins series industrial engines. All engines are turbocharged and after-cooled, and Hydropacks are exceptionally reliable and easy to
Get a Quote