The LX30 hydraulic hammer is a powerful yet lightweight hammer, designed to provide greater stability to piling rigs.
The LX30 hammer provides an economical solution for the installation of all types of piles. It is capable of driving steel, concrete or timber piles in a variety of soil conditions. With a dropweight of 4000 kg, it delivers 30kNm of impact energy.
Major features include total control of hammer stroke and blow rate; precise matching of energy to suit the pile driving requirements while a highly efficient hydraulic system reduces energy loss and maintains a low running cost. The Hydraulic cylinder is BSP-TEX’s own designed and developed system.Read More
Other important features include optimum power to weight ratio and due to the cage and dropweight design the hammer has a short overall length. Design of the cylinder, dropweight connection and shock absorber provide easy access for maintenance.
The hammer can be fitted with a single acting hydraulic system to give an equivalent stroke of 800mm or alternatively a double acting cylinder can be fitted to give an equivalent stroke of 1.2m. In addition, a range of standard drive caps and pile helmets are available. The LX30 can be operated from BSP-TEX power packs or from hydraulic piling rigs or cranes.
Total control of hammer
Designed for easy maintenance
Short overall length
Optimum power to weight ratio
Can operate from BSP Power pack or from hydraulic piling rigs or cranes
A range of standard drive caps and pile helmets are available
The hammers are fitted with a single acting hydraulic cylinder system to give an equivalent stroke of 800mm
|Dropweight Mass (kg)||4000|
|Hammer Energy (kN.m)||30|
|Max Equivalent Stroke (m)||0.80|
|Operating Pressure (bar)||200|
|Hyd Oil Flow required (L/min)||160|
|Blow Rate at rated energy (bpm)||50|
|Basic Hammer Length (mm)||4800|
|Basic Hammer Weight (kg)||7100|
|Maximum Pile Size (mm)||800|
|Max Pile Bearing Capacity (kN)||2400|
Get a Quote