Hydropack 260
BSP-TEX Hydropacks are used to power hydraulic pile driving hammers. Diesel power is provided by either Caterpillar or Perkins series industrial engines. All engines are turbocharged and after-cooled, and Hydropacks are exceptionally reliable and easy to maintain. Engine emission status is selected according to location.
Other features of the hydraulic power pack range include a robust skid frame, central external lifting points, bund for containment of spillages, lockable access doors, and acoustic attenuation. Hydraulic power is produced using Kawasaki variable displacement axial piston pumps.
Read MoreControl panel functions include system protection shut down, engine rpm, emergency stop, system load test and fault diagnosis using the latest CAN bus technology.
-
Turbo charged diesel engines used exclusively for reliability, fuel economy and compliance with the latest EU/EPA regulations
-
Open circuit hydraulic system using electronically controlled axial piston pumps
-
Robust, welded steel skid frame with bund for containment of spillages
-
Lockable doors provide security and easy service access.
-
Tank mounted hydraulic filter with sensor for service indication
-
Hydraulic oil temperature controlled by independent air blast cooler
-
CAN bus control panel functions include, engine rpm, emergency stop, system load test & fault diagnosis
| Model | Hydropack 260 |
|---|---|
| Power Output (kW) | 260 |
| Max Flow (L/min) | 430 |
| Max Operating Pressure (bar) | 300 |
| Engine Type | CAT |
| Engine Model | C9.3B |
| Hydraulic Oil Capacity (L) | 1000 |
| Fuel Capacity (L) | 500 |
| Weight Dry | 5800 |
| Weight c/w fuel & oil | 7200 |
| Length (m) | 4.50 |
| Width (m) | 1.80 |
| Height (m) | 2.30 |
| Engine Emission Status (EU) | Stage-V |
| Engine Emission Status (EPA) | Tier 4 |
| Files |
Datasheet
|
Products Available For: Hydropack 260
CG180
The CG180 hydraulic piling hammer is designed for driving a variety of bearing piles including, raked/batter piles.
CG210
The CG210 piling hammer is designed for driving a variety of bearing piles including steel tube, combipiles, H-sections, raked/batter piles and reinforced/prestressed concrete piles and can be operated from piling rig leaders or crane suspended.
CG240
The CG240 piling hammer is designed for driving a variety of bearing piles including steel tube, combipiles, H-sections, raked/batter piles and reinforced/prestressed concrete piles and can be operated from piling rig leaders or crane suspended.
CG300
The CG300 piling hammer is designed for driving a variety of bearing piles including steel tube, combipiles, H-sections, raked/batter piles and reinforced/prestressed concrete piles and can be operated from piling rig leaders or crane suspended.
Get a Quote